Red LED Headlamp with 3 AAA Battery (MT-802)

Red LED Headlamp With 3 AAA Battery (MT-802)

Description

Featuring a sleek design and ample feature set, the 70lumen modoking headlamp is equally at home cooking dinner at the campsite or rappelling off a multi-pitch route after the sun goes down...
Standard distance and proximity modes, both dimmable, are complemented by a red night vision mode-extra handy when waking in the middle of the night-and all modes are accessible via one simple-to-use button. And with a housing built to withstand sprayed water from any angle, this headlamp is ready to brave nearly any storm you may encounter on your adventure.

*1 DoublePower LED, 2 SinglePower white LEDs and 1 SinglePower red LED emit 70 lumens (max setting)
*2settings include full strength in proximity and distance modes, dimming, strobe and red night vision. Red night vision mode has proximity and strobe settings, and activates without cycling through the white mode
*Sleek, low profile design uses 3 AAA batteries (included)
*Protected against splashing or sprayed water from any angle (IPX 4)

Five Led Light Modes

MODES

The special modes and settings make it one of our most versatile headlamps, including: Full strength and dimming in distance or proximity mode, plus red night vision and strobe illumination.
1)Power on/off: Single click. Either the distance or proximity mode will activate at its brightest setting.

2)Switch proximity/distance mode: Power off and then on. The light will switch modes each time

3)Dimming: Hold the switch down while powered on in either proximity and distance white modes, and release at the desired brightness level. When maximum or minimum brightness level is reached, the light will flash and then reverse.

4)Night version: With power off, hold the switch down for 3 seconds and release when the red led powers on. The light will remain in night version mode when powered off. To return to white mode, hold the switch down for 3 seconds while powered off and release when the white mode powers on.

5)Strobe: With power off in eight red night vision or white mode, use three quick clicks.

Attaching and adjusting the elastic head strap

The lamp can also be attached to webbing on packs, harnesses and waistbelts by following the same procedure. When the elastic head strap is properly installed, the elastic will be in direct contact with your forehead. To loosen or tighten the head strap, slide the plastic adjuster forward or backward.



Recommended Use:

1) reading in your tent
2) explore caves, hunting in the wild
3) camping outdoor in night
4) mining for workers
5) suitable for cycling
6) anything need light